Mix only the amount of Magic Water™ you think you will need. You can always mix more, if needed.



Please stir slowly so as not to make bubbles. Continue stirring slowly until completely mixed, about 10 minutes. SIMPLY POUR MAGIC WATER™ AS IF IT WAS REAL WATER!

Magic Water™ can be added to later over a previous layer if needed. Cover your project to prevent dust {and cats!} from getting into the resin. Magic Water™ will set up in approximately 24 hours.

COMPLETE DIRECTIONS AND TIPS IN THE BOX!

Click on small picture (below) to view large picture!

CAUTION: KEEP OUT OF REACH OF CHILDREN
Do not ingest. Store in a cool dry place away from heat or open flame. For adult use or under close supervision by an adult. Fatal or harmful if swallowed, If hardener ingredient {bottle A} or if combined mixture is swallowed, do not induce vomiting. Dilute by giving water or milk to drink if victim is conscious. Get medical attention immediately. Contains Amine curing agent. If resin ingredient, {bottle B}, alone is swallowed, induce vomiting and call a physician immediately. Severe eye irritant. In case of eye contact, flush repeatedly with water for 10 minutes and seek prompt medical attention. Avoid skin contact, may cause allergic reaction. Protective clothing and gloves should be worn when using this product, If skin contact is made, wash affected area with soap and water immediately. Avoid inhalation. Use in well ventilated area.

CLEANING & DUSTING:
I have found that to clean Magic Water™ the best thing is “Anti-Static Plastic Cleaner”, which can be found at the hardware stores next to where they sell Plexiglass. Works great!